ETC ArcSystem Pro D4 Series, Installation Manual, Page: 27 / 68

D4 Series Wall-Mount Driver Installation 21
Wall-Mount D4 Driver 350 and 700
Push-In Terminal Blocks
D4 Driver 350 and 700 wall-mount drivers have push-in terminal blocks. No tools are required to
insert wires into the terminal block.
A
B
Install wire Remove wire
A terminal
B tool slot (square)
•
To install wire, insert the wire into the terminal.
•
To remove wire, insert a 3.5 mm flatblade screwdriver into the tool slot next to the wire
terminal to release the wire, then pull the wire out of the terminal.
Wall-Mount D4 Driver 350 and 700
Power Input Detail
Factory Wire Colors
Model Color Type
North America
and Europe
green/yellow ground/earth
North America black line/hot
North America white neutral
Europe brown live
Europe blue neutral