ETC ARCP1, Installation Manual

Page: 13 / 64

System Overview 7
Chapter 1
System Overview
ArcSystem luminaires are available in 100–240 V standard models with IEC connectors, 100–
125 V emergency models with NEMA 5-15 connectors, or 100–277 V hard-wired standard or
emergency models. ArcSystem Pro One-Cell luminaires require an external driver.
ArcSystem Pro One-Cell
•
external 100–277 V D1 Series or D4 Series
driver required
•
ideal for short/medium throw
•
25 W full load power consumption
•
fixed version recessed/flush mount only
•
adjustable version recessed/flush mount
with two-axis tip and tilt
•
yoke mount version with two-axis tip and
tilt
•
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Small
•
external 100–277 V D1 Series or D4 Series driver
required
•
ideal for short/medium throw
•
25 W full load power consumption
•
adjustable version recessed/flush mount with
single-axis tilt
•
yoke mount version with single-axis tilt
•
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro One-Cell High Output
•
external 100–277 V D1 HO driver required
•
ideal for long throw
•
100 W full load power consumption
•
fixed version recessed/flush mount only
•
adjustable version recessed/flush mount
with two-axis tip and tilt
•
beam angle options: 18°, 30°, 50°
ArcSystem Pro One-Cell Micro
•
external 100–277 V D2 driver required
•
ideal for short/medium throw
•
20 W full load power consumption
•
adjustable version recessed/flush mount with
two-axis tip and tilt
•
yoke mount version with two-axis tip and tilt
•
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro Two-Cell
•
integral driver
•
ideal for medium throw
•
55 W full load power consumption
•
Standard: 100–240 V with IEC connector or
100–277 V hard-wired input options
•
Emergency: 100–277 V hard-wired input
options
•
yoke-mount only
•
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro Four-Cell
•
integral driver
•
ideal for medium/long throw
•
100 W full load power consumption
•
Standard: 100–240 V with IEC connector or 100–
277 V hard-wired input options
•
Emergency: 100–277 V hard-wired input options
(linear and square); 100–125 V hard-wired cables
with NEMA 5-15 connectors (four-cell round,
North America only); 100–240 V hard-wired
cables with bare ends (four-cell round, Europe)
•
linear and square yoke-mount and round options
•
beam angle options: 19°, 24°, 37°, 60°
ArcSystem Pro Eight-Cell
•
integral driver
•
ideal for long throw
•
200 W full load power consumption
•
Standard: 100–277 V hard-wired input
options
•
Emergency: 100–125 V with NEMA 5-15
connectors or 100–277 V hard-wired input
options
•
yoke-mount only
•
beam angle options: 19°, 24°, 37°, 60°
Note:
The ArcSystem Pro One-Cell Micro is not available in 5000 K or Fade to Warm
variants. The ArcSystem Pro One-Cell High Output is not available in 3500 K, 4000 K,
5000 K, or Fade to Warm variants.