ETC ARCP1, Installation Manual

Page: 12 / 64

6 ArcSystem Installation Manual
ArcSystem Multi-Cell Emergency Luminaires with Integral Drivers
Model Description
ARCPE2* 100–277 V Pro Two-Cell Emergency
cULus
•
Conforms to UL 924
•
Certified to CSA C22.2 No. 141
EU
CE certified
FCC compliant
ARCPE2RDM 100–277 V Pro Two-Cell RDM Emergency
ARCPE4L* 100–277 V Pro Four-Cell Linear Emergency
ARCPE4LRDM 100–277 V Pro Four-Cell Linear RDM Emergency
ARCPE4S* 100–277 V Pro Four-Cell Square Emergency
ARCPE4SRDM 100–277 V Pro Four-Cell Square RDM Emergency
ARCPE4R* 100–125 V or 100–240 V Pro Four-Cell Round Emergency
ARCPE4RRDM
100–125 V or 100–240 V Pro Four-Cell Round
RDM Emergency
ARCPE8* 100–277 V Pro Eight-Cell Emergency
ARCPE8RDM 100–277 V Pro Eight-Cell RDM Emergency
*wireless-capable
FCC Compliance
Wireless-capable ArcSystem products comply with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause
undesired operation.
ArcSystem wireless products contain FCC ID for US: TYOJN5168M5 and Industry Canada (IC) ID:
IC 7438A CYO5168M5.
Note:
Wireless-capable ArcSystem products have been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference
at his own expense.
EU Declaration of Conformity
Wireless-capable ArcSystem products comply with the essential requirements of the RED
Directive of the European Union (2014/53/UE).
Wireless-capable ArcSystem products also comply with the following standards:
ETSI EN 301 489-17 V2.1.1 (2009), ETSI EN 301 489-1 V2.2.0 (2011), Draft ETSI EN 301 489-17
V3.2.0 (2017), Draft EN 301 489-1 V3.2.0 (2017), ETSI EN 300 328 V1.8.1 (2012), ETSI EN 300
328 V1.9.1 (2015), ETSI EN 300 328 V2.1.1 (2016)