ETAS
Technical Data
ES620.1 - User Guide
28
The WEEE symbol (see Fig. 5
1 on page 27) on the product or its packaging
shows that the product must not be disposed of as residual garbage.
The user is obliged to collect the old devices separately and return them to the
WEEE take-back system for recycling.
The WEEE directive concerns all ETAS devices but not external cables or batter
-
ies.
For more information on the ETAS GmbH Recycling Program, contact the ETAS
sales and service locations (see chapter “Contact Information” on page 39).
5.7
Use of Open Source software
www.etas.com
.
5.8
System Requirements
5.8.1
Hardware
Operating the ES620.1 module requires a DC voltage supply of 7 V to 29 V.
PC with one Ethernet interface
A PC with one open Ethernet interface (10 Mbit/s, full duplex) with RJ-45 con
-
nection is required. Ethernet interfaces that are implemented with an additional
network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful initialization of the module
To deactivate the power saving mode
Choose in System Control Center / Device Manager / Network Adapter the
used network adapter by double-click. Deactivate the "Allow the computer to
turn off this device to save power" option in the "Power Management" register.
Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• “Link down Power saving”
• "Allow the computer to turn off this device to save power".
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
