ETAS
Getting Started
ES595.1
-
User Guide
33
6.3.3
“ETH1” Port
To connect the ES595.1 module with other modules (“ETH1” port), you require
the CBE130 cable.
Simple Module Network
A simple module network consists of a single ES595.1 module with connected
network or measure modules. ES59x measure modules are used in the follow
-
ing example.
To connect an ES595.1 with ES59x measure modules
1. Connect the
ETH1
port of the ES595.1 with the Ethernet cable
CBE130.
2. Connect the second cable connector with the
HOST
port of an
ES59x measure module.
Complex Module Network
A complex module network consists of several cascaded ES59x line modules
with connected measure modules. ES59x measure modules are used in the
following example.
With larger module networks, it is a good idea to make a sketch of the planned
module network. The following figure shows an example of a module network
with three cascaded ES59x modules.
Fig.
6
-
5
Example of a Module Network
To connect an ES59x module with other ES59x modules
1. Connect the
HOST
port of the subordinate ES59x module with
the
ETH1
port or with the
ETH2
port of the superordinate
ES593.1-D module
or
2. connect the
HOST
port of the subordinate ES59x module with
the
ETH1
port of the superordinate ES595.1 module
The superordinate ES59x module is nearer the host PC in the
hierarchy.
3. Connect further ES59x modules in accordance with this princi
-
ple with other
ETH
ports of the ES59x module.
ES592
ES592
ES595
ES592
ES595
ES59x
HOST
