ETAS
Hardware Description
ES595.1
-
User Guide
14
4
Hardware Description
This chapter provides you with an overview of the ES595.1 with information on
the housing, serial number, ports and LEDs.
4.1
Overview
The ES59x line is a range of powerful ECU and bus interface modules. The
ES59x modules have an upstream Ethernet interface that guarantees data
exchange with the host PC or with a Drive Recorder.
The ES595.1 module has a downstream Ethernet interfaces that can be con
-
nected with ES59x, ES600, measurement and interface modules.
Fig.
4
-
1
View of the Device
Individual measurement, calibration and rapid prototyping modules are easy to
combine with ES59x line modules. ECUs that have an XETK, or ECUs that have
their own Ethernet interface can be connected directly with an ES595.1 module
and communicate with INCA via Ethernet. The ES595.1 has the ECU interfaces
ETK, CAN, LIN and FlexRay.
If necessary, systems can be cascaded using ES59x nodes. The Ethernet
switch guarantees the time-synchronous sampling of all measurement chan
-
nels – even in sizeable module networks.
The ES595.1 module and the relevant cables are intended for use in the lab, on
the test bench and in the passenger cell of vehicles.
4.2
Features
Overview of the major features of the ES595.1:
• Ethernet switch with a 10/100 Mbit/s data rate:
– One host port (upstream)
– One portfor compatible modules (downstream)
– Can be cascaded up to 15 modules
– Automatic standby function
– Precise synchronization of all connected modules and their measure
-
ment channels
• ETK interface
