ETAS
Startup
ES583.1 - User's Guide
19
4. Select
Delete the driver software
for this device
and click on
OK
.
The system uninstalls the USB drivers for ES583.1.
4.4
Verifying the installation of the USB driver
In the Device Manager of Windows, you can check which hardware drivers are
installed and which status they have.
Verifying the USB driver installation:
1. Select
Start
Control Panel
Device Manager
to start the
Device Manager of Windows.
The
Device Manager
window opens.
2. Select
ETAS Bus Interfaces
.
3. Verify that the ES583.1 module features the new entry
ES583.1 USB - FLX
.
The figure below identifies the entry with a red arrow.
Fig. 4
-
1
Windows Device Manager
When Windows detects the ES583.1 module at the USB port, but the USB driver
for the module was not installed, then an exclamation mark ( ) appears next
to the entry for the module.
Execute the program for installing the USB driver again to remedy this problem.
