ETAS
Startup
ES583.1 - User's Guide
16
4
Startup
The "Startup” chapter describes the preparation of the installation, the Installa
-
tion, the uninstallation as well as checking the installation of the USB drivers for
the ES583.1.
4.1
Preparing the installation
4.1.1
USB driver
4.1.2
Checking system requirements
Verify that your PC meets the system requirements.
To install the USB driver on the PC, you require the user rights of an administra
-
tor. If necessary, contact your system administrator.
4.1.3
CD-ROM
The supplied CD-ROM includes:
• USB driver for the ES583.1 with installation wizard
• Hardware Service Pack (HSP) for updating the firmware
• Documentation: ES583.1 User's Guide (this document)
The application for installing the USB driver is in the root directory of the CD-
ROM as executable
autostart.exe
file.
Or you can install the driver via the supplement contained in the HSP (HSP
V10.1.1 and higher).
4.2
Installing the USB driver
Regardless of whether you install the USB driver from the CD
-
ROM or a network
drive, the procedure is identical.
Installing the USB driver:
1. In the main window, select the
Drivers
option.
The Drivers window opens.
2. Select Install ES583.1 - USB Drivers.
The ETAS program for installing the USB drivers for the
ES583.1 is started.
NOTE
A specific USB driver must be installed on the PC for operating the ES583.1
module.
CAUTION
The USB driver must be installed on the PC first before you connect the
ES583.1 to the USB port of the PC.
