ES5392.1 High Current Switch Board (6-CH) - User’s Guide
29
ETAS
Design, Installation and Fuses
2.6
Accessories
2.6.1
Connecting Cable
ETAS offers the following cables as a product:
When ordering a power supply from ETAS (e.g. SM52-AR-60) from Delta Elek-
tronika, the matching cable is included in the scope of supply.
2.6.2
External Power Supplies
A list of the power supplies supported by the software is located in the RTC
User's Guide in the section of the ES5392 description.
Name
Short name
Application
Power Supply Controller
Connection Cable,
HD-DSUB15-DSUB25
(14mc-25mc), 3 m
CBAV325.1-3
Connection of control and
feedback signals (X1 of
ES5392.1) to a TDK Lambda
GEN-50-30 lab power supply*
High Current Switch Board
Connection Cable, DSUB-
3W3-Ring Tongue M8
(3fc-2xmc), 3 m **
CBAV305.1-3 ** Connection of high current (X3
Battery Input) to a TDK Lambda
GEN-50-30 lab power supply
Connection Cable, DSUB9-
Lemo 1B FGG (9mc - 14mc),
3 m
CBV305.1-2
Connection of an ES4408.1
Load Chassis (X2 SwCtrl)
*
Or a power supply with the same pin assignment
** The cable pair of the wire with ring terminals is imprinted with numbers. The
numbers’ meaning is as follows:
Cable Imprint
1
2
Signal
+VBAT
-VBAT
