ETAS ES5371.1, User Manual

Page: 19 / 34

ES5371.1 Carrier Board for ES443x Load Boards - User’s Guide 19
ETAS Features and Functions
2.3.2 Inserting the ES5371.1 into the Slot
• Shut down the Real-Time PC and disconnect the
power supply to the ES5300.1-A Housing by
switching it off on the back of the device.
• Wait a few minutes until the components (capaci-
tors etc.) have discharged.
• Position the ES5371.1 (gripping plate on the front
panel must be pointing down!) into the top and
bottom rail of the slot and insert it slightly.
• Carefully slide in the carrier board until the back-
plane connector of the ES5371.1 is completely
plugged in to the backplane socket.
• Secure the carrier board by tightly screwing on the
slot bracket.
CAUTION!
Before assembling the ES5371.1 in the ES5300.1-A Housing, please
ensure that the Load Board is correctly assembled in the ES5371.1!
CAUTION!
When sliding in the board, please make sure there are no cables in
the way – if necessary, pull the cords into the front door area.
CAUTION!
The circulation of air within the ES5300.1-A Housing can only be
ensured if all free slots are covered with front panels. If not, overtem-
perature can be the result, activating the overtemperature protection
of the ES5300.1-A.
Ensure you cover all free slots with front panels!