ETAS ES5371.1, User Manual

Page: 13 / 34

ES5371.1 Carrier Board for ES443x Load Boards - User’s Guide 13
ETAS Introduction
1.7 About This Manual
This manual consists of the following chapters:
• "Introduction" on page 5
This chapter
• "Features and Functions" on page 15
This chapter describes the features and functions of the components of
the ES5371.1 Carrier Board for ES443x Load Boards.
• "Pin Assignment and Connections" on page 21
This section describes the various connectors of the ES5371.1 Carrier
Board for ES443x Load Boards.
• "Technical Data" on page 27
This chapter contains the technical data on the ES5371.1 Carrier Board for
ES443x Load Boards.
1.7.1 Using This Manual
Representation of Information
All activities to be carried out by the user are shown in what we call a "Use-
Case" format, i.e. the target to be achieved is defined briefly in the title and the
individual steps necessary to achieve this target are then listed. The information
is displayed as follows:
Target definition
Any introductory information...
• Step 1
Possibly an explanation of step 1...
• Step 2
Possibly an explanation of step 2...
Any concluding remarks...
Concrete example:
To create a new file
If you want to create a new file, no other file may be open.
• Select File → New .
The "Create file" dialog box appears.
• Enter a name for the file in the "File name" field.
The file name must not exceed 8 characters.
• Click OK .
The new file is created and saved under the name specified. You can now work
with the file.