ETAS ES5340.2, User Manual

Page: 98 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 98
Connector Assignment and Display Elements ETAS
6.1 Connector Assignment
This section describes the assignment of the connectors of the inputs and out-
puts of the ES5340.2.
6.1.1 Connectors for the Outputs (ES5340.2-M and ES5340.1-S)
The connector is a DSUB25 connector (female). The shielding is to the front panel
and housing potential and thus to protective earth.
Fig. 6-1 Connectors for the outputs (top view)
Tab. 6-1 Assignment of the connectors for the outputs
Pin Signal Pin Signal
1 Analog Output Channel 0 14 Ground Channel 0
2 External Ref. Channel 0 15 Digital Output Channel 0
3 Analog Output Channel 1 16 Ground Channel 1
4 External Ref. Channel 1 17 Digital Output Channel 1
5 Analog Output Channel 2 18 Ground Channel 2
6 External Ref. Channel 2 19 Digital Output Channel 2
7 Analog Output Channel 3 20 Ground Channel 3
8 External Ref. Channel 3 21 Digital Output Channel 3
9 Analog Output Channel 4 22 Ground Channel 4
10 External Ref. Channel 4 23 Digital Output Channel 4
11 Analog Output Channel 5 24 Ground Channel 5
12 External Ref. Channel 5 25 Digital Output Channel 5
13 n.c. Housing to protective earth
Note
Analog and digital ground of an output channel are identical!
13
25
14
1