ES5340.2 Electric Drive Simulation Board - User’s Guide
90
Configuring the Hardware in LABCAR-RTC
ETAS
3. Select the "Signals" tab to, if necessary, calculate
an average of a configurable number of measured
values.
5.3.5
Digital Inputs
The digital inputs can be used to measure various properties of digital signals
(frequencies, duty cycles etc.).
Adding a Digital Input
1. Right-click the "ES5340-Dig-In" item and select
Add Item
.
2. In the list, select the "ES5340-Dig-In-Meas" item
and click
OK
.
The item is added.
Summary of Contents for ES5340.2
