ES5340.2 Electric Drive Simulation Board -User’s Guide
38
Hardware Description
ETAS
3.3
Generating Digital Signals
These outputs are used for different digital signals via an output multiplexer.
The
ES5340.2-M
has
eight digital outputs
, while the
ES5340.1-S
has
six dig-
ital outputs
.
3.3.1
Specification
The
output voltage
is 0 to 60 V (open collector) or 5 V (internal pull-up).
All outputs are
galvanically isolated
and have an
electric strength
of ±60 V –
in addition, each output has a cutoff relay.
The
maximum current
of an output is ±15 mA. The
rise time
(0 V
→
5 V) is
2 μs, while the
fall time
(5 V
→
0 V) is 2 μs.
Summary of Contents for ES5340.2
