
ETAS
Getting Started
ES523.1
-
User Guide
30
6.3.3
“ETH1”, "ETH2" and “ETH3” Port
To connect the ES523.1 module with other modules (“ETH1”, "ETH2" and
“ETH3” port), you require the CBE130 cable.
Simple Module Network
A simple module network consists of a single ES523.1 module with connected
network or measure modules. ES59x measure modules are used in the follow
-
ing example.
To connect an ES523.1 with ES59x measure modules
1. Connect the
ETH1
port of the ES523.1 with the Ethernet cable
CBE130.
2. Connect the second cable connector with the
HOST
port of an
ES59x measure module.
3. Connect further modules in accordance with this principle with
the
ETH2
port of the ES523.1.
Complex Module Network
A complex module network consists of several cascaded ES59x line modules
with connected measure modules. ES59x measure modules are used in the
following example.
With larger module networks, it is a good idea to make a sketch of the planned
module network. The following figure shows an example of a module network
with three cascaded ES59x modules.
Fig.
6
-
5
Example of a Module Network
ES523
ES592
ES595
ES592
ES595
ES523
HOST