ES4441.1 Compact Error Simulation Module with Breakout Frontpanel - User´s guide
9
ETAS
General Information
1.1.6
Intended Use
The ES4441.1 Compact Error Simulation Module is a 19” housing with a height
of 9 HU which can be assembled in a rack using the corresponding mounts.
The ES4441.1 is intended to be used as follows:
• In industrial lab facilities or at industrial workplaces,
• As a hardware interface for ECUs in a Hardware-in-the-Loop test system,
• In conjunction with ETAS software supported by the ES4441.1,
• As an interface together with software programs that serve the standardi-
zed, documented and open APIs of ETAS software products.
The ES4441.1 is not intended to be used:
• In a vehicle on the road,
• As part of a life support system,
• As part of a medical application,
• In applications in which misuse can lead to injury or damage,
• In environments with conditions outside the specified ranges (see "Envi-
ronmental Conditions" on page 78).
Requirements for Operation
The following requirements are made to ensure safe operation:
• Only use the product in accordance with the specifications in the relevant
User’s Guide. Product safety is not guaranteed if the device is used other
than intended.
• Observe all applicable regulations on site concerning electrical safety as
well as the rules and regulations on occupational health and safety!
• Never use the product in a wet or damp environment.
• Never use the product in areas subject to explosions.
• Make sure you keep the surface of the product clean and dry.
Transport
WARNING!
The ES4441.1 must always be integrated in the ETAS LABCAR system
and must not be used as a "standalone" unit.
WARNING!
The ES4441 weighs at least 25.9kg. Always ensure there are two
people to lift and carry the transport box or the housing itself.
