ES415.1 - User’s Guide
95
ETAS
8.3
Cable for the Connection "Sensor"
8.3.1
CBAV400.1 Cable
Fig. 8-17
CBAV400.1 Cable
The CBAV400.1 cable consists of four identical cable sections, marked n=1 to
n=4. Each cable section [n] is assigned to an ES4xx measurement channel [n] and
wired according to the same scheme.
Fig. 8-18
Connection „Sensor“ (one Cable Section)
The assignment of the connections of the BNC connector of a cable section to
the signals of a measurement channel [n] is shown in the table.
Notes about the Application
If you replaced modules with BNC cabling with ES4xx modules in your measuring
setup, the use of these adapter cables enables you to continue using the existing
cabling of your measuring setup.
Temperature rated for: -40 °C to +125 °C
Note
The sensor supply voltage of the module
cannot
be used if the cable
CBAV400.1 is used.
Pin
Signal
Meaning
1 (inside)
CH[n] In+
Measurement channel [n], input (+)
Outside
CH[n] In-
Measurement channel [n], input (-)
Product
Length
Order number
CBAV400.1-0m3
0.3 m
F 00K 104 916