ETAS ES411.1, User Manual, Page: 68 / 92

ETAS
ES413.1 - User’s Guide 68
7.9.2 “OUT” Connector
Fig. 7 - 3 “OUT” Connector
The following socket is mounted on "OUT" connector:
LEMO 1B 8-pin A-coding (connection identified in yellow)
7.9.3 Sensor Connection Cable
7.9.3.1 ES413.1-OW
The integrated sensor connection cable consists of four identical cable sec -
tions without connectors, marked n=1 to n=4. Each cable section is assigned to
an measurement channel and wired according to the same scheme. The
assignment of the cable connectors of a cable section to the signals of a mea
-
surement channel is shown in the table.
Pin Signal Meaning
1 UBatt Operating voltage
2 UBatt Operating voltage
3 Ground Ground
4 RX+ Received data, plus
5 TX- Send data, minus
6 RX- Received data, minus
7 Ground Ground
8 TX+ Send data, plus
Signal Meaning Color
In+ Input (+) Green
In- Input (-) Yellow
S+ Sensor supply (+) Brown
SGND Sensor supply (GND) White
1
7
8