ETAS
Technical Data
ES413.1 - User’s Guide
58
7.1.2
Standards and Norms
The module adheres to the following standards and norms:
The module is designed only for use in industrial environments in accordance
with EN 61000-6-4. When using the module outside of industrial environments
avoid possible radio disturbances by additional shielding measures!
Labeling for WEEE, see chapter 7.4 on page 60
Labeling for CE conformity, see chapter 7.3 on page 60
Labeling for RoHS (China), see chapter 7.2.2 on page 60
Norm
Test
EN 61326
Electrical equipment for measure
-
ment, control and laboratory use -
EMC requirements
EN 61000-6-2
Immunity (industrial environments)
1)
EN 61000-6-4
Emission standard (industrial environ
-
ments)
1)
: The module must be powered by a direct current power supply or a battery
with operation voltage. Between module and power supply unit cables with a
maximal length of 30 m are permitted.
WARNING
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
Symbol
Description