ETAS
ES413.1 - User’s Guide
46
5.6
Wiring
The ports may be wired in any order. Special connecting cables are available
and can be ordered separately. An overview is contained in the chapter “Cables
and Accessories” on page 71.
5.6.1
“Sensor” Cable
You need no additional cables to connect the sensors to the ES413.1. Choose
that module version which allows you to continue to use the wiring you have
used to date for your test set-up:
ES413.1-OW
You can adapt the open connection of the integrated sensor connection cable
yourself to suit the specific connector system of your test set-up.
ES413.1-L0B
If you have swapped CSM "ADMM 4" or "ADMM 4 pro" modules for ES413.1-
L0B modules in your test set-up, this ES413.1 version allows you to continue to
use the wiring you have used to date for your test set-up.
ES413.1-L1B
If you have swapped IPETRONIK "M-SENSE 4" modules for ES413.1-L1B mod
-
ules in your test set-up, this ES413.1 version allows you to continue to use the
wiring you have used to date for your test set-up.
To wire the ES413.1 with the sensors
1. Connect the sensors and transducers to the ports of the inte
-
grated sensor connection cables of the ES413.1.
2. For your application program, jot down the assignment of the
sensors to the inputs of the ES413.1 in accordance with the
wiring of the test set-up.