ETAS
Getting Started
ES413.1 - User’s Guide
36
5.2.1
How to Connect and Attach ES400 Modules
Fig. 5
-
2
Through Holes and Openings for Cable Fasteners
5.2.1.1
Through Holes
Every ES400 module has two through holes to enable different assembly pos
-
sibilities:
• If several modules are required in one location, they can be connected,
with additional parts, to form a measuring instrument block (cascading).
• The modules can be connected onto other components (parts of the
vehicle body, units).
5.2.1.2
Openings for Cable Fasteners
Every module base has two openings each on the right and left-hand side for
attaching the modules to other components using cable fasteners.
5.2.2
Examples for Mounting
Examples for mounting using the different possibilities to connect and attach
ES413.1 modules are:
• Connecting modules with each other (connecting in a cascade),
• Attaching modules to other components with screws and
• Attaching modules to other components using cable fasteners.
5.2.2.1
Connecting Several ES400 Modules Mechanically
Here, you connect a number of ES400 modules (housing with through holes)
with each other using two additional screws or threaded rods with nuts
inserted through the holes.
TIP
The through holes have a diameter of 4 mm and a length of 40 mm.
TIP
The through holes have a diameter of 4 mm and a length of 40 mm.
Trough Holes
Openings for
Cable Fasteners