ETAS CBN101.1, User Manual

Page: 25 / 34

CBN101.1/CBN103.1/CBN105.1/CBN107.1 - User’s Guide 25
ETAS Technical data
CBN105.1 (Lemo plug)
Fig. 3-7 Lemo FGG.1B.306.CLA
Pin Signal Description
1 Out+ Output voltage of the measurement
probe, plus
2 Out- Output voltage of the measurement
probe, minus
4 Supply Supply voltage, plus
5 Supply_GND Supply voltage, ground
Cable shield is connected with Lemo plug housing.
CBN107.1 (Lemo plug)
Fig. 3-8 Lemo FGG.1B.310.CLA
Pin Signal Description
1 Out- Output voltage of the measurement
probe, minus
2 N.C. No connection
3 Supply_GND Supply voltage, ground
4 Out+ Output voltage of the measurement
probe, plus
5 N.C. No connection
6 N.C. No connection
8 TEDS- TEDS, GND
9, Housing Cable shield
10 TEDS+ TEDS
Cable shield is connected with Lemo plug housing.
Note
Note