ETAS
Hardware Description
BR_XETK-S3.0
-
User Guide
19
Fig.
4
-
3
ETAM8 Adapter mounted at CON2
4.3
Automotive Ethernet Interface
The Automotive Ethernet interface (100BASE-T1) of the BR_XETK-S3.0 can not
be connected to a PC directly, but a media converter has to be inserted in
between.
Its purpose is to transform the physical layers of Automotive Ethernet (1 differ
-
ential pair / 2 wires) into Standard Ethernet (2 differential pairs/ 4 wires) and
vice-versa. The media converter has to be connected to CON1 (refer to
Fig.
4).
The combination of the BR_XETK-S3.0 and the Automotive Ethernet media
converter CBEB100.1 / CBEB105.1 is integrated in the ETAS IP world with auto
-
matic IP management and supports the open automotive "Universal Measure
-
ment and Calibration" standard "XCP on Ethernet" (TCP/IP, UDP/IP).
The open "XCP on Ethernet" interface allows for connecting to the BR_XETK-
S3.0 with third party application software.
NOTE
The Automotive Ethernet interface is not compatible with the standard Ether
-
net interfaces of ETAS modules. An Automotive Ethernet Media Converter or
an ES88x ECU Interface Module is needed to connect the BR_XETK-S3.0 to
the PC.
NOTE
Please see chapter 7.1.2 on
43 for additional information regarding PC
requirements for the Ethernet interface.
E T A M8
Adapter
2
1
20
19
