eta PelletsCompact33-50 kW, Operation

Page: 20 / 76

20 www.eta.co.at
Getting to know the control system ETAtouch controller
5.1.6 Getting started
5.1.6.1 System settings
Open the system configuration
By tapping the symbol (in the lower left of the
screen), the system settings menu opens.
Fig. 5-14: Open the system configuration
In the system settings, among other things, the date
and time is set, the language of the control system is
set, and access to the remote "meinETA" system is
activated.
With corresponding authorisation, the software for the
ETAtouch control system is updated in this menu.
Fig. 5-15: System configuration menu
To close the system settings, simply tap the
symbol again.
5.1.6.2 Setting the language
Change the language using the ETAtouch control
system
The language used can be changed using the
ETAtouch control system For this, open the system
preferences
and tap the [Language] symbol. A
settings window appears.
Fig. 5-16: Setting the language
Select the desired language. Following this, the
ETAtouch control system will appear in the chosen
language.
5.1.6.3 Setting the date and time
Setting the date and time
The date and time can be adjusted to the respective
time zone. The date and time are factory-set to Central
European Time (UTC+01:00). For setting on the
screen, tap the date or time. A settings window
appears.
Fig. 5-17: Date and time