Configuration
Starting the configuration assistant
21
9
Configuration
Topic of this configuration
Only the steps required for the configuration of this
product are described below.
The configuration of the complete heating system is
described in the "Configuration" manual supplied with
the boiler.
9.1
Starting the configuration
assistant
Starting the configuration assistant
Begin by raising the access level to [Service].
Then open the [Toolbox] menu by pressing the
button; then press [Configure system].
9.2
Adjusting and adding function
blocks
Adjust options and settings for the [Boiler]
function block
Select the required function block from the [Selected
FUBs] column:
Press
to display the options.
A window opens. In it, activate the following options:
Press [Settings] to see the available settings.
To change the setting, press to mark it and then press
[Change]. A window with the possible selection opens.
Press [Accept] to save.
Make the following settings:
Press [Options] to save the settings. The window with
the options appears.
To finish, press [Accept] to save the changes.
Adding the [Pneumatic conveyor system] function
block
This function block is preconfigured at the factory.
Select the required function block from the [Possible
FUBs] column:
Press
to add the function block.
A window with the options opens. Close it by pressing
[Accept].
The function block has been added and appears in the
[Selected FUBs] column.
Adding the [Pellet store] function block
This function block is preconfigured at the factory.
Select the required function block from the
[Possible FUBs] column:
Press
to add the function block.
A window with the options opens. Close it by pressing
[Accept].
The function block has been added and appears in the
[Selected FUBs] column.
Continue configuration
Continue the configuration by pressing [Next].
Selected FUBs
HA-C 0
Boiler
Special conveyor
Fuel: Pellets
Flue gas recirculation: Yes
Conveyor type: Direct screw for pellets
Possible FUBs
HE-C 0
Pneumatic conveyor system
Possible FUBs
HE-C 0
Pellet store
Summary of Contents for HACK 130-200
