12
www.eta.co.at
Exchange for HACK VR
Installation
3.3
Exchange for HACK VR
Dismantle defective control panel
Remove the frame together with the control panel from
the boiler panel.
Fig. 3-21: Frame
Disconnect all lines on the control panel. Unscrew the
attachment nuts and remove the defective control
panel.
Fig. 3-22: Control panel
Enlarge cut-out for the new control panel (if
desired)
The new control panel protrudes slightly due to the
existing cut-out in the cover. See the following graphic.
Fig. 3-23: Side view with existing cut-out
If this is not desired, the cut-out can be enlarged
so that the new control panel is more flush with
the cover. A cutting template for this can be seen in
chapter
Fig. 3-24: Side view with enlarged cut-out
Summary of Contents for BE-P3
Page 19: ......
Page 20: ...www eta co at www eta co at downloads DOWNLOAD...
