The remote control menu <Programming>
Doc. no. BA012497_02
59 / 107
GB
5.
Assign the required channel number to the first channel. To do this,
press the
button to select the channel number and confirm the
selection with the
button.
6. Return to the channel selection by pressing the
button.
7. Use the
button to select the next channel and confirm the selec
-
tion with the
button.
8. Assign the required channel number to the channel. To do this, press
the
button to select the channel number and confirm the selec
-
tion with the
button.
9. Follow the same process for the two remaining channels.
10. Once each channel has a channel number, return to the channel se-
lection by pressing the
button.
11. Use the
button to select the <OK> command and confirm the
selection with the
button.
12. End programming mode by pressing the
button.
The channel numbers are reassigned.
8.5 DALI map
The four DALI interfaces of the Light Control Box are initially assigned to
the lighting channels numerically. For example, DALI interface C2 corre-
sponds to the lighting channel C2.
This allocation can be changed to suit your preferences using the
DALI map
function. You can also assign several DALI interfaces to one lighting chan-
nel.
Assigning a different lighting channel to a DALI interface:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <DALI map> and con-
firm the selection with the
button.
4. Press the
button to select the desired DALI interface and confirm
the selection with the
button.