The remote control menu <Programming>
Doc. no. BA012497_02
58 / 107
GB
The lighting automatically switches off if
• the ambient light is brighter than the set target brightness
or:
• no movement is detected
and
• the preset off delay time for the light has elapsed.
Activating semi-automatic:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4.
Select the <Semi-automatic> menu item and confirm the selection
with the
button.
5. End programming mode by pressing the
button.
Semi-automatic mode is now active.
8.4 Channel Map
This function enables you to assign a different channel number to a light.
The new channel number must not be assigned to a different light. The
remote control helps you to re-sort the channel numbers by preventing any
invalid assignments.
What if you want to use multiple Light Control Boxes? Execute the
Channel Map function before you connect the Light Control Boxes
via DALI.
Assigning a new channel to a light:
1.
Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <Channel map>, and
confirm the selection with the
button.
4. Press the
button again.