The <Functions> remote control menu
Doc. no. BA012497_02
45 / 107
GB
The DALI switch can be activated and deactivated for any scene.
7.5.2 DS1/DS2 off
The menu items <DS1 off> and <DS2 off> are identical. You can switch on
any non-DALI compatible lighting channel individually.
How to switch off a lighting channel with DS1 or DS2:
1.
Select the <Functions> menu item and confirm the selection with the
button.
2. Select the
button to choose the menu item <DALI switch> and
confirm the selection with the
button.
3. Select the
button to choose the menu item <DS1> for example,
and confirm the selection with the
button.
The DALI switch device switches the lighting off.
7.6 Reset
The reset command has two purposes: It switches off the entire room light-
ing temporarily. It also deletes any commands that put the Light Control
Box into override mode.
After a reset, the Light Control Box switches to energy-saving mode. The
lighting remains off until the Light Control Box detects a presence or re-
ceives a command to switch the lighting back on. Once presence has been
detected or a re-activation command has been received, the Light Control
Box works in normal operation as per the programming.
Triggering a reset:
1.
Select the <Functions> menu item and confirm the selection with the
button.
2. Select the
button to choose the menu item <Reset> and confirm
the selection with the
button.
The entire lighting switches off.
7.7 Test start/stop
The
Test start
function tests the detection range of the detector. During the
test phase, the lighting is set to maximum brightness.