GB
34 / 44
MA01708100
Settings with the ESY Control app
or
•
the level of ambient light is above the configured brightness
switching value
and
•
the configured switch-off delay time has elapsed
Setting options: < 2 - 2000 lx > < Accept current light value >
In the
< Accept current light value >
setting, you can read in the current
light value as a brightness switching value. In this case, the motion
detector measure the current light value and adopts this as the new
brightness switching value.
Acknowledgement:
The lighting switches on. The detector LED provides
various feedback signals during transmission. After the changes have been
completed, the green detector LED flashes three times to confirm this.
The lighting then switches off.
7.2.5 Switch-off delay time
This setting determines how long the light remains switched on after the
last detected movement. Each detected movement restarts the switch-off
delay time.
The switch-off delay time is activated when …
•
the lighting is switched on due to movement
•
the level of ambient light is below the brightness switching value
•
the motion detector does not detect any further movement
Setting options: < Pulse > < 1 min - 240 min >
Acknowledgement:
The lighting switches on. The detector LED provides
various feedback signals during transmission. After the changes have been
completed, the green detector LED flashes three times to confirm this.
The lighting then switches off.
