GB
27 / 44
MA01708100
Settings with the ESY Control app
The motion detector switches the lighting
on or off
until …
•
it detects a movement
and
•
until the configured switch-off delay time has elapsed
Once this time has elapsed, the motion detector switches back to the
configured operating mode. You can cancel this setting by activating the
< Reset to automatic mode >
setting.
Setting options: < On > < Off >
Acknowledgement:
The lighting switches on or off. The violet detector
LED flashes once to indicate that the infrared signal has been successfully
received.
7.1.2 4 h / 12 h light on / off
The lighting is switched on or off for four hours or twelve hours regardless
of movement and ambient light conditions.
Once the four hours or twelve hours have elapsed, the detector switches
back to the configured operating mode.
When this setting is activated, the motion detector no longer
reacts to movement and does not take the brightness switching
value into account.
You can cancel this setting by activating the
< Reset to automatic mode >
setting.
Setting options: < 4 h light on > < 4 h light off > < 12 h light on >
< 12 h light off >
Acknowledgement:
The lighting switches on or off for four hours or twelve
hours. The violet detector LED flashes once to indicate that the infrared
signal has been successfully received.
