Estyma IGNEO Touch, User Manual, Page: 4 / 16

IGNEO touch user manual
Chapter 1. General information
Thank you for choosing our product and congratulations on the best decision. We are happy to hear your comments
about the device.
ESTYMA electronics Team
1.1 I
NTRODUCTION
The boiler regulator IGNEO Touch is a modern microprocessor system, which manages not only the boiler, but
also the heating system. In the full configuration, the regulator can manage:
 4 central heating circuits
 1 hot water circuit.
 1 buffer
 1 solar heating system
 1 additional fuel storage system
Thanks to advanced algotithm and the possibility to regulate multiple parameters, the system can be well adjusted
to the heating system needs.
1.2 S
AFETY
ATTENTION! Electrocution risk !
 Turn off power on the electric switchboard before assembly or disassembly.
 Carefully read the instruction before use.
 Keep the instruction manual and consult it when using the device.
 Abide by the rules of use and warnings written in the instruction manual.
 Check if the device isn't dammaged. When in doubt, don't use the device and contact the retailer.
 If you encouter situations not mentioned in the instruction manual, or you are in doubt about safe usage
of the device, please contact the retailer.
 Pay attention to any warning symbols on the device or packaging.
 The device must be used in accordance with intended use.
 The device is not a toy, keep out of childrens reach.
 Under no circumstances allow children to play with any part of the packaging.
 Keep small parts (screws, wall plugs etc.) away from children. Small elements supplied with the device can
be a choking hazard.
 Do not modify mechanical or electrical parts of the device. It can result in abnormal functioning, malfunctions,
errors and failure to comply with regulations.
 Do not put anything into any openings in the device. It can cause short circuits, electric shock, fire or
complete destruction of the device.
 Do not allow the device to come in contact with water, moisture or dust. It can cause short circuits,
electric shock, fire or complete destruction of the device.
4 www.estyma.pl
EGP -EN 20171024