Estun E200PS, Operation Manual, Page: 7 / 21

E200PS Operation Manual
5
Chapter 2 Operation Example
2.1 Single-Step
2.1.1 Background
Now, There is1 block of metal material, needs to be processed into workpieces with same
length, the require as following:
 Length of each workpiece is 100.00mm
 Gap is 1.00mm
 Distance of retracting is 5.00mm
 Time for the backgauge retract waiting is 2.00s
 Workpiece is 10.
2.1.2 Analysis
Parameter Setting
XP 100.00mm
GP 1.00mm
DX 5.00mm
CL 80
PP 10
Others According to the actual situation to set.
2.1.3 Procedure
Step 1 When the E200PS device is electrified, wait a few seconds into the SINGLE page
(Default page).
Step 2 According to the analysis, press the arrow keys and number keys to modify the
corresponding parameters, as shown in Figure 2-1.
SINGLE
:DestPos Of Axis X Unit:mm
X= 10.00 G = 2.00
XP = 80.00 GP = 1.00
DX = 5.00 CL = 80
PP = 10 CP = 10
XP = 100.00
Figure 2-1 Single-Step example configuration
Step 3 Press to run the device, the device will enter the running page.