E200PS Operation Manual
11
3.4 Multi-Step
In the actual processing, operator user pedal switch to control the shearing
process. In
PROGRAM
page, you can finish the complex operation with carefully
programmed.
Step 1
When the E200PS device is electrified, wait a few seconds into the
SINGLE
page
(Default page).
Step 2
Press
to enter the
PROGRAMS
page, as shown in Figure 3-3.
[Operation Guide]
-
Program-Number is used for storing Multi-Step programming, in order to work again.
E200PS CNC device provide 40 Program-Number to user.
-
Press
to select the target Program-Number and press
to enter, and then the editorial content is automatically saved in this program.
PROGRAMS
0 P
: 1program
1 ST
1
2
5
3
4
11
12
15
13
14
6
7
10
8
9
16
17
20
18
19
Figure 3-3
The
PROGRAMS
page
Step 3
Select the target Program-Number, such as
2program
and press
to enter
PROGRAM
page, as shown in Figure 3-4.
[Operation Guide]
:
Press
to select the parameter you want to modify,
input the value and press
to finish the operation.
NO.
2
PROGRAM
:Total Step
X=
10.00 G =
1.00
ST:
3 STEP
PP:
50 PIECE
CP:
50 PIECE
Figure 3-4
The
PROGRAM
page
Summary of Contents for E200PS
Page 1: ...E200PS Operation Manual Version V1 02...
Page 21: ......