Estia 06-10003, Instruction Manual & Warranty, Page: 13 / 16

13
CLEANING AND MAINTENANCE
1. The power plug must be pulled out from main socket before cleaning the parts and main engine to
prevent electric shock.
2. Except main engine all parts may be cleaned in water and then dried up.
3. A certain volume of hot water and several drops of food cleaner may be added in the water when
the blending parts are to be washed. They can be cleaned through an
4. The device should be stored in a dry and ventilated place when not in use.
5.
Switch off and pull the plug before change of accessories.
6. Idle running by switching on the power button or quick cleaning button for 10 seconds. Also, they
can also be washed in water by a soſt brush.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this
product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available. In order to fulfill ruling UNE EN-60335,
we indicate that if the flexible wire is damaged, it can only be substituted by a technical service recognized bv authorised organization, as per special tooling is required