OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
3-5
November 19, 2009
ACTIVE DATABASE SELECTION
CAUTION:
When the active database is changed, any existing active route is deleted.
1. Copy the SECOND cycle date into the scratchpad, by pressing LSK 2R.
2. Move the cycle date into the ACTIVE field by pressing LSK 1R.
The active database cycle is replaced by the second database cycle, as shown by the interchange of cycle
dates. The active database cycle is displayed in large font. The active database can only be changed on
the ground.
Display the IDENT 2/2 page by pressing [INIT REF], <IDENT> and [NEXT].
This page displays the identification of the magnetic variation, the OEI definition (loaded flight data) and Tactical
Approach Database (if configured).
1 R
2 R
3 R
4 R
5 R
6 R
FMS1 IDENT 2/2
M A G V A R M O D E L
2 0 0 5 ( D E F )
O E I M O D E L
( D E F )
D A T E
S P U M A M K I I + N O V 0 6 / 0 9
T A C T I C A L D A T A B A S E D A T E
S W I S S _ A R E A 5 D E C 1 9 / 0 9
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
