manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 433 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 433

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page 16-1 

 

November 19, 2009 

SECTION 16 

 

MCDU FUNCTIONS 

 
 

MCDU SUBSYSTEM CONTROL  (if configured) 

 
The FMS has the built in capability to interface with External Sub-Systems (ESS) through ARINC 739 protocol 
and act as a MCDU for these external sub-systems. After a FMS cold start, automatic logon into an ESS is 
possible if there is at least one ESS configured in the auto logon priority list.  There are 11 FMS hardkeys can 
be assigned as key logon functions in the configuration. When a hardkey is pressed, the FMS will logon into the 
assigned ESS. 
 
The MCDU MENU page displays all configured external sub-systems and the internal FMS. 
 
Display MCDU MENU X/X page by pressing [MENU]. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The sub-systems displayed have a dedicated key.  The internal FMS is displayed at LSK 1L.  The name of 
ESS1 is displayed at LSK 2L, the name of ESS2 is displayed at LSK 3L and so on. 
 

NOTE:  That up to 7 external sub-system can be installed, meaning 8 equipments can be displayed on the 

MCDU MENU page (including the internal FMS that is always part of the sub-system list), from LSK 1L 
to LSK 5L on MCDU MENU 1/2, and from LSK

 

1L to LSK 3L on MCDU MENU 2/2. 

 

1 R

2 R

3 R

4 R

5 R

6 R

      MCDU MENU     1/1 

                                   

<

FMS1    <REQUESTING>

 

 

<

FMS2    <ACTIVE>

 

 
 
 

<

ACARS    

<TIMED-OUT>

 

 
 
 
                   COMM

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments