OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-16
November 19, 2009
SEARCH PATTERN DELETION
A. PRIOR TO ACTIVATION (INACTIVE)
1. Display the desired search waypoint by pressing [LEGS], [NEXT] or [PREV] as required.
2. Key in “/”.
3. Cancel the search by pressing the appropriate LSK.
The "/s" legend at the selected waypoint is deleted. The waypoint is not deleted from route.
4. Accept the modified route by pressing [EXEC].
B. AFTER ACTIVATION (ENGAGED)
Perform a standard Direct-To procedure to any waypoint.
MARK ON TOP (If configured)
The CMA-9000 FMS can store the current system position in the predefined store point label "ONTOP". This
position is displayed on the PREDEF WPT 2/2 page and can be used also for creating a new user waypoint.
This function allows the operator to create a waypoint instantly when flying over a landmark or a mission
significant point.
A. {
If CFG KEY 2 is not configured to the MARK functional key
}. Press [INIT REF].
To access the PREDEF WPT 2/2 page, press <MARK ON TOP> (LSK 4R) or <[INIT REF], <WPT LISTS>,
<PREDEF WPT> and [NEXT].
NOTE: The display below does not contain the LAST PLS position (PLS equipment not configured) and the
UPDATE POS prompt (EGI or DVS equipment not configured).
1 R
2 R
3 R
4 R
5 R
6 R
INIT/REF INDEX 1/2
<
IDENT WPT DATA
>
<
POS INIT WPT LISTS
>
<
CTR LEGS NEAREST
>
<
FIX INFO MARK ON TOP
>
<
SETUP NAV STATUS
>
<
MSG RECALL DES+SAR
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference