OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
7-21
November 19, 2009
DELETION OF PROCEDURE TURNS
If an approach transition including a procedure turn has been loaded into the route, it can be readily deleted and
converted into a straight-in approach.
With the ACT or MOD RTE x LEGS 1/X page displayed:
1. Line select to the scratchpad (do not key in), the procedure turn reference fix LSK 4L.
2. Move the procedure turn reference fix to the TO WPT location by pressing LSK 1L.
The procedure turn reference fix and the two outbound waypoints are deleted from the MOD route, and the
FAF waypoint becomes the TO WPT, with the correct inbound course to the FAF displayed as the default
intercept course.
NOTE: The procedure turn also can be deleted by deleting the reference fix by means of the [CLR] functional
key. However, depending on the order of the deletion and direct-to navigation actions, the intercept
inbound course may have to be entered manually since the default value will be that of the original leg
inbound to the reference fix.
1 R
2 R
3 R
4 R
5 R
6 R
ACT RTE 1 LEGS 1/3
0 4 2
o
3 6 . 8
N M
ANC
/
2 3 3
o
P - T 3 . 0 0
N M
ANC
PT
L
1 8 8
o
P - T 2 . 2 5
N M
ANC
PT
R
R 0 5 3
o
C R S 4 . 8 6
N M
ANC
FAF
0 5 3
o
C R S 5 . 0 9
N M
RW06R /o
MAP
<
RTE 2 LEGS LEGS ETA
>
ANC
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference