Estate Swing E-S 1600 Series, Instruction Manual, Page: 32 / 50

3.6
Wiring the Operator Arm(s) for Push To Open
1. Locate the wiring terminal board on the bottom of the
operator arm(s).
2. Wire the operator arms according to the diagram below.
NOTE: 1 indicates Master arm or Single operator connections, 2 indicates Slave arm if ap-
plicable and is not used in single gate installations.
The main difference with Push To Open is the matching of column 1 with column 6 in
the chart above. Note how the FCCs no longer match up and the FCAs don’t either, al-
so the power leads are swapped.
We have recently changed provided wire colors. If your wire colors do not match the
chart above and you need help determining terminal placement, call 1-800-640-GATE
for assistance.
Wiring Connections for Operator Arm Power.
Position
from right
in arm Color
Inside
Arm Arm to Board
Wire Color Terminal
Purpose Board
Terminal
Block Board Connection
Terminal
M Red Red/White
Lg. Wire Power CN2 CHM1 (master)
CHM2 (slave - if dual)
M Black Black/White
Lg. Wire Power CN2 APM1 (master)
APM2 (slave - if dual)
COM Yellow Yellow
Sm. Wire
Limit
Common CN3 COMF (For both master
and slave- if dual)
FCC Red Red
Sm. Wire Limit
Open
Position CN3 FCA1 (master)
FCA2 (slave - if dual)
FCA Black Black
Sm. Wire Limit
Closed
Position CN3 FCC1 (master)
FCC2 (slave - if dual)