The following section is instructions on
mounting your gate opener. Your gate can
be mounted one of two ways:
Pull-To-Open:
With the gate opener on the inside of the
property, the gate will swing in towards the property. The
gate opener will be extended in the gate’s closed
position and as the opener retracts it
PULLS
the gate
open.
Instructions are pages 2.3 - 2.9
Push-To-Open:
With the gate opener on the inside of the
property, the gate will swing out away from the property to-
wards the street. The gate opener will be
retracted in the gate’s closed position and as the opener
extends it
PUSHES
the gate open.
Instructions are pages 2.10 - 2.16
After deciding which method you will use
to automate your gate, make an X across
the pages of the installation method you
will
not
be using.
This will prevent mistakenly using the wrong instructions
for your installation as the two sections look very similar.
2.2