Safety instructions
0973008-52-03
DDE 2000 // DDE 3000
15
4.6. Preventing dust hazards
CAUTION
Damage due to dust release
Maintenance, cleaning, repair and emptying work must be done only by
expert personnel.
Wear personal protective gear.
-
Respirator mask (particle filter class P3)
-
Protective clothing
-
Protective gloves
Set up locally filtered forced-air ventilation where the device is being
maintained, inspected or cleaned.
Operate the device only with the complete filtration system.
Seal the intake connection piece with a sealing plug so it is dust-tight when
transporting.
CAUTION
Damage due to dust build-up in the pipe system
Check the connected piping system regularly for dust deposits.
Observe the minimum air speed required for your application and the
resulting minimum airflow volume.
When removing the dust collection carton and the collection
drawer, dust inhalation cannot be ruled out. That is why all
servicing, cleaning and maintenance procedures, including the
removal and emptying of the collection drawer, are only to be
performed by specialist personal with personal protective
equipment.
The people assigned to cleaning work must be instructed on the
aspirated toxic materials. All distractions by uninvolved persons
and the environment must be prevented. Clean the maintenance
area thoroughly once maintenance is complete.
