Safety instructions
14
DDE 2000 // DDE 300
0973008-52-03
4.5
Preventing electrical hazards
DANGER
Electric shock from high voltages
Follow the safety rules for working with electrical devices
Secure the device against reactivation with a padlock
Render the device voltage-free by pulling the mains connector
Any work on the electrical grid and on voltage-conducting parts may only
be performed by an electrical specialist.
Do not damage by running over, crushing, straining, etc.
Regularly check the power cable for damage and ageing.
Do not use if damage has been found on the power cable!
Keep covers closed during operation
The device must be secured from being switched on again while work is
being carried out on it.
All electrical parts must be covered by fixed, securely fastened protective covers
that can be removed only with tools. The device complies with Protection Class I
according to EN 60335.
After use, before moving the device to another site and before cleaning,
maintenance, or replacement or removal of movable parts, switch off the system
at the main switch and pull the mains connector.
