eSSL inBIO460 Series, User Manual

Page: 5 / 38

 The equipment is wetted or exposed to bad weather (rain, snow, etc.).
 If the equipment cannot work normally even though operated as instructed,
please be sure to adjust only the control components specified in the operation
instructions. Incorrect adjustment of other control components may cause
damage to the equipment, and add to troubleshooting workload of the qualified
technicians.
 The equipment falls down or its performance changes obviously.
8. Replacing components: If it is necessary to replace a component, the repair
personnel must use only the substitutes specified by the manufacturer.
9. Security inspection: After the equipment is repaired, the repair personnel are
supposed to conduct security inspection to ensure the equipment can work normally.
10. Power supply: Operate the equipment with only the type of power supply
indicated on the label. Contact the operator for any uncertainty about the type of
power supply.
Violation of any of the following cautions is likely to lead to equipment
failure, even the personal injury.
 Before installation, switch off the external circuit (that supplies power to the
system), including lock power.

Before connection the equipment to power supply, ensure the output voltage is
within the specified range.
 Never connect power before completion of installation.
2
Installation Guide for inBIO 4 60 Series Control Panel