eSSL AiFace-Venus, User Manual

Page: 32 / 74

SpeedFace M1/M2 User Manual
Communication Settings are used to set the parameters of the Network, PC connection, Wirless Network, Cloud
server, and Wiegand.
Tap COMM. on the main menu.
When the device needs to communicate with a PC over the Ethernet, you need to configure network
settings and ensure that the device and the PC are connecting to the same network segment.
Click Ethernet on the Comm. Settings interface.
Menu Description
IP Address
The factory default value is 192.168.1.201. Please set the IP Address as per the
requirements.
Subnet Mask
The factory default value is 255.255.255.0. Please set the value as per the
requirements.
Gateway
The factory default address is 0.0.0.0. Please set the value as per the
requirements.
P a g e | 35
5.1 Network Settings
5 Communication Settings