manualshive.com logo in svg

Essilor Delta 2 Classic, User Manual, Page: 93 / 158

Share
Download
Essilor Delta 2 Classic User Manual Download Page 93

USER MANUAL > EDGING A LENS

Delta 2 - Edging system > v2 - 08.16

93

1.

2.

3.

4.

5.

6.

7.

8.

9.

b. Customized groove legend screen

Automatic groove

Customized grooves

Front surface tracking: the middle of the groove is positioned at a constant distance from the front surface.

Rear surface tracking: the middle of the groove is positioned at a constant distance from the rear surface.

Distributed groove: the middle of the groove is positioned in proportion to the thickness of the lens, with respect

to the front surface.

Lens curve tracking: the camber of the groove is adjustable.

Lens thickness

Maximum lens thickness - represented by the white square along the shape

Minimum lens thickness - represented by the red square along the shape

Cursor movement

The cursor is represented by the green square along the shape. To move it, select it directly or use the 

 and 

 buttons.

Zoom window

Distance between the edges of the groove and the front & rear surfaces of the lens at the position of the cursor.

Groove settings

Distribution value - according to the type of customized groove selected

Groove depth (in mm)

Groove width (in mm)

Modify the selected setting

Groove trajectory

Flat representation of the lens making it possible to measure the distances between the groove and the front & rear surfaces
of the lens.

Summary of Contents for Delta 2 Classic































































































































































Reviews:

No comments