manualshive.com logo in svg

Essilor Delta 2 Classic, User Manual

The Essilor Delta 2 Classic user manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidance for using the Essilor Delta 2 Classic product efficiently. Easily access the manual on manualshive.com and maximize the benefits of your Essilor Delta 2 Classic.

Share
Download
background image

USER MANUAL > CARRY OUT AN OPTICAL TRACING

Delta 2 - Edging system > v2 - 08.16

25

5.  

6.  

7.  

8.  

9.  

10.  

11.  

12.  

13.  

14.  

15.  

16.  

Frame base

Curve angle

Material of the frame / pattern / demo lens or recut lens

Job identifiers

Back to the default display

Display all jobs starting with the selected letter

To display the all jobs starting with the selected letter:

Press once if it is in the first position on the button,

Press twice in succession if it is in the second position,

Press three times in succession if it is in the third position.

Example:

Press 3 times on the 

 button to display all jobs starting with the letter R.

> The R goes into upper case: 

.

> The jobs starting with the letter R are displayed.

Select several jobs

Press 

 to select several non-consecutive jobs in the list.

Example: Press on the button then select jobs #1, #5, #7.

> Only jobs #1, #5 and #7 are selected.

Press 

 to select a group of consecutive jobs in the list, then select the first and the last of the group.

Example: Press on the button then select jobs #1 and #10.

> All jobs from #1 to #10 are selected.

Select all jobs

Press 

 to select all jobs for the search in progress.

Delete the selected job(s)

Press 

 to delete the selected job(s). A confirmation message is displayed.

Search for a job by ID or by reference

Rename the selected job

Duplicate the selected job

Export the selected jobs

to the Essibox or a PMS.

Call the selected shape to the work area

b. Job list

The job list enables you to save jobs on a daily basis. It has a 500-job storage capacity.

Summary of Contents for Delta 2 Classic































































































































































Reviews:

No comments

Related manuals for Delta 2 Classic

Clarke 07096A Operator'S Manual preview
07096A
Brand: Clarke Pages: 44
National Optronics Horizon II Instruction Manual preview
Horizon II
Brand: National Optronics Pages: 61
Tanaka TPE-2501/270PF/PN Owner'S Manual preview
TPE-2501/270PF/PN
Brand: Tanaka Pages: 40

Brands by name

Popular brands

Load more brands