For your protection and safe operation of the unit, please read the following:
Avoid water and other liquids
To avoid risk of fire and electrical shock: do not expose this device to moisture. Use indoors
and in dry locations only. Do not expose to dripping and/or splashing. Do not place objects
filled with liquids -such as vases- on or near the device. Do not operate the unit if any liquid
is spilled on or into the unit; return it to your dealer for servicing.
Don't open the device
To avoid risk of electrical shock: do not open the device. There are no user serviceable
parts inside. Repairs have to be performed by qualified personnel only.
Unplug before cleaning
Always disconnect the unit before cleaning. Only clean the unit with a dry cloth or duster.
Do not use any cleaning solutions, sprays or water.
Connect to mains ground
For safety reasons and to protect connected equipment, this product MUST be connected
to mains with a three conductor power cord which includes a working ground conductor.
The power cord MUST be plugged into a grounded AC power outlet (3-pin). Do not use a
3-to-2-pin adapter to bypass the grounding pin. Failing to plug this product into a
grounded outlet through a ground conductor including mains cord may result in personal
injury or damage to your equipment. Call a licensed electrician if you are unsure if your AC
outlets are properly grounded.
Do not overload individual outputs
Do not connect loads which draw more current than the maximum rating for each
individual outlet. Possible damages due to exceeding these maximum ratings will void
warranty. The MAXIMUM CURRENT rating for each outlet may differ, please look at the
Specifications
further on in this manual for maximum loads.
Do not exceed maximum total load
The total current drawn from all outlets together may not exceed 16 Amps. At 230 Volts
mains supply this is equivalent to 3680W.
Check your supply voltage
This device is designed for 220-240V~ @ 50/60 Hz mains supply. Connecting to a different
voltage may damage the device and warranty will be void.
Avoid condensation
If the device is moved from a cold to a warmer area, allow the product to warm up to
room temperature before connecting it to the mains supply. This is to avoid condensation
inside the device.
Connect power cords safely
Power cords should be routed in such a way that they are not likely to be walked on or
pinched by items. Do not route power cords near heat sources. To disconnect the power
cord, pull it out by the plug (wall outlet side first). Do not pull the cable itself, doing so may
result in damage which can lead to fire or electric shock.
Safety precautions
6.
Summary of Contents for 8
Page 2: ......
