Page
15
of
30
TIP: When mounting all devices, ensure to attach the device to a
surface that is clean, dry, flat and smooth
– for optimal performance of the
adhesive.
6 Mounting and Activating Devices
6.1 Mounting Camera
1. Please note that the Camera functions also as a Motion Detector.
2. Remove the mounting base & battery cover from the Camera and insert 3 AA
batteries. For the next 10 minutes, the red light in the Camera may glow
periodically as the device conducts a series of tests.
3. Replace the battery cover and mounting base onto the Camera.
4. Use the double-sided tape to mount the Camera (spherical lens pointed down)
on a wall, about 220 cm above the floor and at least 10 cm below the ceiling.
5. Place the Camera in a suitable location that does not face into sunlight or other
strong light sources.
6. For optimal surveillance, the Camera should be placed in a position where it will
capture images from the main point of entry.
7. Do not install the Camera in a location that is directly opposite a window.
8. For detaching the device from the wall (in case of battery replacement or any
other maintenance activity) push the white lock at the bottom of the device and
slide the device down.
6.2 Mounting Motion Detector
1. Remove battery cover from the Motion Detector and insert 2 AA batteries. For
the next 10 minutes, the red light in the Motion Detector may glow periodically as
the device conducts a series of tests.
2. Replace the mounting base onto the Motion Detector.
3. Use the double-sided tape to mount the Motion Detector (spherical lens pointed
down) on a wall, about 220 cm above the floor and at least 10 cm below the
ceiling.
