MAGPRO-WS
Intelligent analogue addressable
fire alarm sounder MAGPRO-
WS
Distributor:
Elite Security Products Ltd,
Unit 7 Target Park, Shawbank Road
Lakeside, Redditch B98 8YN, UK
http://www.espuk.com
Manufacturer:
Teletek Electronics JSC
Address: 14A Srebarna Str, 1407 Sofia, Bulgaria
Http://www.teletek-electronics.com
Installation Instruction
MAGPRO-WS is аn addressable Wall Mount Sounder designed for installing in addressable fire alarm systems supporting MAGPRO
communication protocol. The device is powered on from the panel and can be controlled via the communication protocol.
The device SensoIRIS WS is compatible with fire base MAGPRO-DB
for ceiling or wall mounting and WSB IP65 for wall mounting
.
Attention
:
Power off the loop circuit
before installing the MAGPRO-WS addressable fire base
!
1. Choose the proper place for installation of the device
.
2. Set the device address
using
MAGPRO-PROG
Programmer
or directly from addressable fire panel
.
The address must be in the range from
1
to
250.
3. Mount the fire base
on the ceiling or on the wall of the protected premises using fixings
according the mounting surface.
4. Connect the base
to the fire panel using the wiring diagram.
5. Insert the sounder into the base
and rotate clockwise until it drops into place - the short mark on the base fits with that on the sounder body.
Continue to rotate the sounder until its mark coincides with the long mark on the base - a click is heard.
6. Program the device parameters.
Choose in consecutiveness from the control panel:
System - Programming - Devices - Loop.
Find the
installed sounder, as enter address, loop and zone number - the panel automatically will recognize the type of the device. Choose the button
MORE
to enter in the additional settings menu.
7. Test the sounder for proper operation.
TECHNICAL SPECIFICATIONS
18020180; RevC; 01/2018
!
A-weighted sound
level
diagram
ATTENTION: Read carefully this installation Instructions before installing
the device!
This manual is subject to change without notice
!
91dB
9
6
dB
95dB
90dB
86dB
1m
86dB
15°
45°
75°
105°
135°
165°
EN54-3:2001
EN54-3:2001/A1:2002
EN54-3:2001/A2:2006
Sounder Type B
DoP No: 040
1293-CPR-0463 Rev.1
1293
17
Operating Voltage Range . . . . . . . . . . . . . . . . . . 15
-
3
2VDC
(Nom. 27VDC)
Nominal consumption (stand-by) . . . . . . . . . . . .
<500
μ
А@27
VDC
Maximal consumption (main tone type 27)
:
-
low volume level. . . . . . . . . . . . . . . . . . . . . .
<
5m
А
- high volume level . . . . . . . . . . . . . . . . . . . . .
<
16.5m
А
Maximal consumption (other tone types):
-
low volume level. . . . . . . . . . . . . . . . . . . . . .
<4
m
А
- high volume level . . . . . . . . . . . . . . . . . . . . .
<
1
0
m
А
Power volume (main tone type 27)
:
- low volume . . . . . . . . . . . . . . . . . . . . . . . . . . ~ 80dB
(A)
±
6dB @ 1m
- high volume . . . . . . . . . . . . . . . . . . . . . . . . . ~ 92dB
(A)
± 5
dB @ 1m
Power volume (other tone types)
:
-
low volume . . . . . . . . . . . . . . . . . . . . . . . . . . 75-85dB
±
3dB @ 1m
- high volume . . . . . . . . . . . . . . . . . . . . . . . . . 80-95dB
±
3dB @ 1m
Number of tone types . . . . . . . . . . . . . . . . . . . . .
32
Supported communication protocol. . . . . . . . . . . MAGPRO
2
Wire Gauge for terminals . . . . . . . . . . . . . . . . . . 2.5mm
Relative humidity resistance
. . . . . . . . . . . . . . . .
(93
± 3)%
@
40°
C
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116x55mm
Color
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
red
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ABS
Essential characteristics
Performance under fire
conditions
Performance
Operational reliability
Pass
Pass
Temperature resistance
Humidity resistance
Corrosion resistance
Resistance to ingress
Electrical stability
Shock and vibration
resistance
Durability:
Pass
Pass
Pass
Pass
Pass
Pass
-10°C
÷
+
50
°C
Installation
~183
g
Indoor use*
Outdoor use**
!
IP43C (ЕN54-3)*
IP65 (EN60529)**
* When used with base MAGPRO-DB
** When used with base WSB IP65
